How To Effectively Avoid Overcharging Electric Folding Bike

- Aug 31, 2017-

How to effectively avoid overcharging Electric Folding Bike
      Many people in the Electric Folding Bike charge, a charge will be filled one night, but in fact this kind of charging method is overcharged, is not correct, then how can we effectively avoid overcharging, Electric Folding Bike manufacturer as Professional Electric Folding Bike production and sales company will give us a detailed introduction.
      When the charger is full to stop charging, can not charge a night or even a few days. Overcharge will cause the plate active material hardening off, and produce dehydration and battery deformation. Batteries in the high temperature season to run, there are mainly overcharge problems. Therefore, the summer should try to reduce the battery temperature, to ensure good heat, to prevent exposure after the sun exposure, and should be away from heat. In addition to select the charger parameters to match the battery, to fully understand the operation of the battery in the hot season, as well as the entire life of the changes during the period. Do not use the battery in the overheating environment, especially when charging should be away from heat. After the battery heat to take cooling measures, until the battery temperature to return to normal when the charge. The installation location of the battery should be as good as possible to ensure good heat, and found that overheating should stop charging, check the charger and battery. When the battery discharge depth is too shallow or the ambient temperature is high, the charging time should be shortened.
      To the Electric Folding Bike charging is not the longer the better, there must be a certain degree, so as to make the battery longer use, but also extend the use of Electric Folding Bike time.
  Electric Folding Bike use short circuit phenomenon Although not often encountered, but in order to try to avoid this phenomenon, we should have a certain understanding of the corresponding knowledge. Today, Electric Folding Bike manufacturers will explain how to prevent short-circuit phenomenon.
      1, in the installation or use should be particularly careful, the tools used should be taken insulation measures, the connection should be the first battery outside the electrical even.
      2, the inspection without a short circuit, and finally connected to the battery, wiring specifications should be good insulation, to prevent overlapping pressure generated rupture.
      3, prohibit the use of battery short circuit method to detect the battery charge situation, to prevent the explosion caused by casualties, the battery in the short circuit state, the short-circuit current up to hundreds of amps. Short-circuit contact more prison, the greater the short-circuit current, so all connected parts will produce a lot of heat, heat in the weak part of the larger, will connect the fuse, resulting in short circuit phenomenon.
      4, the battery may produce local explosive gas or charge when the collection of explosive gas, at the junction of the fuse when the fuse will cause the battery explosion, if the battery short circuit time is short or the current is not particularly large, may not cause a connection At the phenomenon of fusing, but the short circuit will still have overheating, will damage the connection around the adhesive, leaving the leakage and other hidden dangers.
      Electric Folding Bike battery If there is a short circuit phenomenon is not just can not use the problem, and there will be a huge potential danger exists, so be sure to try to avoid the existence of Electric Folding Bike short circuit phenomenon.
  Electric Folding Bike convenient and practical, praised by the majority of users, on the use of Electric Folding Bike Note We have introduced a lot for everyone, but on the Electric Folding Bike fire knowledge, we may still know little, today's Electric Folding Bike manufacturers will be popular for everyone about this knowledge.
      1, Electric Folding Bike charging must be away from flammable items, can not charge too long, charging time is too long, the charger overheating easily lead to fire, charging should be in accordance with the provisions of the instructions to charge, charging time in principle not exceed 10 hours. When charging, the charger should be placed in a place where it is easier to heat, if the electric bicycle battery quality is poor or prolonged use, the charger temperature is very high, causing a fire.
      2, should always check the Electric Folding Bike circuit plug point, to prevent contact with the contact caused by ignition, heat; to avoid the aging of the line, wear and cause short circuit, the occurrence of string accidents. Electric Folding Bike battery will run out of the combustible gas, so the charge must not be in a narrow, sealed environment, should be carried out in the outdoors, or remove the battery alone charge. When charging to select the appropriate line, line laying should be fixed installation, to install short circuit and leakage protection device.